Chain Parts

Quality Standard: 
No obvious pull marks, embossing, cracking and severe burrs on the surface of the chain.

2. The bright band requirements of the chain hole wall: the bright bands are evenly distributed, the proportion of the bright band of the hard material is ≥50%, and the proportion of the bright band of the annealing material is ≥90%.

3. Heat treatment requirements:
a, HRC40-46,
b. The surface protection layer is firm and the color is uniform,
c. The outer edge has sharp corners and burrs.

4.Material:Carbon Steel,40Mn, 45Mn,50#,40Cr,40CrMo,35CrMo

                                                                                                                                                                                    

The first component is the pin. Typically these are manufactured out of carbon steel and depending on the quality level, the pin can be thru-hardened, case hardened, or heat-treated. We can also supply roller chain pins as stainless steel or nickel plated.

 

Roller links which are also commonly known as inside links consist of two bushings, two rollers, and two inside side plates. Our Economy Plus and General Duty Plus roller links are manufactured with split bushings and solid rollers, and our Premier Series roller links are manufactured with solid rollers and solid bushings.

 

Usage:Transmission Chain,agricultural chain, industrial chain,ect.

Material:Carbon steel

Grade: 30CrMnTi, 42CrMo, 40Cr

Structure:Roller Chain

Conveyor Chains (M Series)

Pitch: 40.0mm to 200.0 mm

For Free Samples

Prompt Delivery

                                                                                                                                                                         

Tengmei not only do we offer cold rolled steel strip, but we can also supply roller chain parts.

 Roller chain parts are good to keep on the shelf in large facilities for making emergency repairs and chain editing. 

We keep roller links, connecting links, offset links, and side plates for some sizes in stock. Other components such as bushings, pins, or rollers can be supplied within a short lead time. Below we show what parts go into a roller chain and what they are used for, then we show how a roller chain is typically assembled.

 

Solid bushings provide the best performance factor because of their seamless design. This promotes smoother operation with less friction and if dust, dirt, or other debris get into the roller chain. A solid bushing will wear at a slower rate than split. Split bushings are used in the majority of roller chains and is the most common design for chain manufactures. They do keep the cost of a roller chain down, but the added friction and possible bushing deforming because of stretch will cause pre-mature wear. Our Economy Plus series roller chains use the split bushing design for customers needing a light duty chain, while most of the General Duty Plus series chains use the solid bushing design for moderate applications, and the Premier Series chains only use solid bushings along with a bunch of other benefits for extreme duty applications.

 

 

Roller & Bush For Transmission Chain Inspecification:

1) Different models are available.

2) Carbon Steel 20 Mn,normal steel stripQ195

3) Many colors to choose.

                                                                                                                                                                                    

Outside of the bushing on a roller chain is the roller. This is the part of the chain that engages with the sprocket and is the first line of defense when it comes to wear. Because of this, pretty much all of our roller chains are manufactured using solid rollers. Due to the amount of metal-on-metal contact, proper lubrication is a must! We offer a wide range of lubricants that range from general applications to specific food grade applications.

 

Basic Info.:

Made Style::Manufacture and OEM

Transport Package: With customer request

Specification:Standard Roller Chains Parts

Origin:Zhejiang China

Material : 10#, Q195

Application: Motorcycle Chain, Industrial chain, Agricultural chain

                                                                                                                                                                                


Why Choose Us?

1) We are the factory which makes more competitive price and faster delivery directly.

2) We work with big customers in worldwide.

3) We have a strict quality management system, each procedure have several quality control personnels.

4) Reasonable price with high quality.

5) We provide OEM service with high and medium quality.

6) We have great experience on provide high quality service to customers.

7)Welcome to visit our factory




FAQ
1.Are Your Manufacturer Or Trader?
Yes, we are real manufacturer, if you need other special product, we will do our best to help you, so we can build a long-term business relationship.
2. Can I Order The Product With Special Size?
Of course you can, also we will produce the products according to your requirement.
3. Why We Are Your Best Chiose?
We are professional manufacturer of the steel products.Till now, We have exported our products to more than 50 countries of the world. 
We supply the professonal suggestions to different customer and help customer to buy the right products at the best price.